A study on the interactions among several plant secondary compounds and aphids

The research, focused on the specific interactions among seven plant secondary compounds and aphids, was carried out and the preliminary results showed: (1) "T-typed tube method" was regarded as the best method compared with others designed to observe the interactions. (2) Cabbage aphid was able to be attracted by laurolene while it was not susceptible to α-pinene, β-pinene and diamylene. (3) Gossypol, a major secondary substance in cotton, was able to be implicated as feeding attractant to cotton aphid. (4) Rutin might be implicated repellent to cotton aphid.     

Occurrence and congeners specific of poiychlorinated biphenyls in agricultural soils from Southern Jiangsu, China

A total of 198 agricultural soil samples were collected from Zhangjiagang and Changshu in Southern Jiangsu for analysis of 13 polychlorinated biphenyls (PCBs) in order to assess the levels of pollution, sources, area distribution, and potential risk for the environment. All methods were rigorously tested and an adequate quality control was ensured. Only one site had no PCBs residues, and the highest total PCBs concentration in the surface soils was 32.83 ng/g. The average concentration in all the soil samples was 4.13 ng/g, signaling low-level pollution. Tetra-, penta-, and hexa-chlorinated biphenyls were dominant species in soil samples, accounting for more than 75% ofΣPCBs in the soil samples. PCB118 was the most abundant congener in all the samples. The PCB118 was about 20% ofΣPCBs. The soil organic matter content showed only a weak correlation with the levels of all PCB congeners, in which a better correlation was noted for the more volatile lighter PCB congeners than for the heavier homologues. To a certain extent, the sources and land use seemed to influence the levels of PCBs.     

一种特殊形状制件的成形工艺

对弹匣前口板这种特殊形状制件成形工艺进行了讨论,找到了一种具有较高材料利用率,较高生产效率及简便易行的成形方法.     

楔横轧模具的铣削加工及其机床设计

根据楔横轧模具孔型及其加工成形的特点,对楔横轧模具大面积大螺距楔形提出了一种简单高效的铣削加工方法,并设计制造了楔横轧轧辊模具孔型加工专用机床——SDM机床。新设计的SDM机床投资小,可以加工直径为φ620 mm～φ1000mm的轧辊模具,加工导程最大可达469 mm,加工周期短,成本低,且大大降低了工人劳动强度。     

后扣板冷挤压工艺及模具

此文分析了产品成形的特点,模具承载的负荷特点,从而在成形工艺上、润滑上、模具结构及选材上采取了相应的措施.用H-4水基高分子润滑剂和3Cr2W8V制作冷挤压模都取得了明显效果.     

江苏王港地区现代潮滩地貌发育特征

淤泥质潮滩是人类活动的强烈地带，江苏王港地区淤泥质潮滩宽广，由于人工引种大米草，滩涂围垦，大丰港的修筑，影响了王港地区原有潮滩发育的动力机制。王港地区生物分布和地貌特征具有明显的分带性。由于植被的促淤作用，王港地区潮滩南部垂向淤积速率较北部大；研究区内潮水沟的发育有两种类型。即泥滩带上的块体崩塌溯源侵蚀和零星分布的米草滩上的洞穴塌陷溯源侵蚀形成潮水沟；潮间带下部实测平均涨潮流流速小于平均落潮流流速，而涨潮平均含沙量大于落潮平均含沙量，潮间带下部潮水往复流及旋转流的作用在滩面上形成了双向波痕，陆地向海推进速度随着泥沙供给的减少以及滩面高程的降低而减慢。     

Effect of airborne SO_2 on performance of the turnip moth,Agrotis segetum Schiff

SO2 Pollution; rape plant (Brassica chinensis); turnip moth (Agrotis segetum); growth and developmental parameters.     

温压工艺中聚合物添加剂的加入方式

采用温压技术制备铁基粉末冶金材料,研究了干混和湿混两种聚合物添加剂加入方式及压制温度对生坯和烧结体性能的影响,并对其作用机理进行了探讨.试验结果表明,干混混合粉生坯及烧结体的性能略高于湿混混合粉生坯及烧结体的性能,但前者的最佳压制温度范围略高.     

Effects of fluoride on growth and reproduction of the army worm, Mythimna separata (Walker)

This paper deals with effects of airborne fluorine on the army worm, Mythimna separata (Walker), by rearing the larvae on the wheat foliage exposed to HF or fumigating the larvae on the artificial diet with the pollutant. Larval relative growth rate (GR) and index of population trend of the insect reduced by 5% and 11%, respectively, when the larvae were reared on the foliage taken from the wheat plants exposed to 0.87 g·dm-2·day-1 of fluorine compared with those of the control. An extra instar appeared in a majority of the larvae treated. Survival rate and GR of the larvae on the wheat plant being exposure to the same concentration of fluorine in field open-top fumigation device were 40% and 15% lower than that of the control, respectively. Similar experiment with the insect on the artificial diet also showed that direct impact of the pollutant on the army worm was greater than its indirect effect via their host plant.     

Interfacial effects of suspended particles on biodegradation of N (2,4 dimethyl phenyl) N'' methylformamidine hydrochloride and dibutyl phthalate in waters

ＩｎｔｅｒｆａｃｉａｌｅｆｅｃｔｓｏｆｓｕｓｐｅｎｄｅｄｐａｒｔｉｃｌｅｓｏｎｂｉｏｄｅｇｒａｄａｔｉｏｎｏｆＮ（２，４ｄｉｍｅｔｈｙｌｐｈｅｎｙｌ）Ｎ’ｍｅｔｈｙｌｆｏｒｍａｍｉｄｉｎｅｈｙｄｒｏｃｈｌｏｒｉｄｅａｎｄｄｉｂｕｔｙｌｐｈｔｈ...